This week we look at an Interim Tier 4 loader-tool carrier from Case Construction Equipment and an upgraded pipe fusion machine from McElroy Manufacturing.Click to begin the slide show.
Product Snapshot: Loader-Tool Carrier and Pipe Fusion Machine
The SB 702 Hydraulic Breaker has a single-piece housing design, which eliminates the need for side bolts, as well as a percussion mechanism and guide system in a single block of steel. The breaker works with a wide oil-flow range, and it is compatible with a variety of carrier vehicles. In case of hydraulic overload, the SB 702 has an integrated protection valve to prevent damage to the breaker. Atlas Copco; 800-732-6762; www.atlascopco.us
Unknown
The CPS 185 PDU Portable Compressor is powered by a 49-hp Interim Tier 4 engine, and it is able to provide 185 cfm of air at 100 psi. The skid-mounted, rotary-screw compressor also features a powder-coated steel enclosure that has a one-piece canopy for easy access. It also boasts a cold-start aid and, to prevent damage to the starter, a low-fuel shutdown function. Chicago Pneumatic; 800-760-4049; www.cp.com
Unknown
The Case 570N XT Loader-Tool Carrier is powered by a 78-net-hp engine that employs cooled-exhaust-gas recirculation and a diesel particulate filter to meet Interim Tier 4 emissions standards. It has a bucket breakout force of 9,271 lb and a hinge-pin height of 11 ft, 3 in. The loader-tool carrier features the same power-train components as Case N Series loaders and backhoes. Case Construction Equipment; 866-542-2736; www.casece.com
Unknown
The TracStar 500 Series 3 Pipe Fusion Machine features several improvements over earlier models, including an indexer-mounted heater, throttle setting and hydraulic clamping. The machine is capable of fusing six-inch IPS, 20-in.-dia thermoplastic pipes. The fusion carriage can be removed and lowered into ditches for pipe fusions in tight spaces. McElroy Manufacturing Inc.; 918-831-9256; www.mcelroy.com
Unknown
September 26, 2012
No Comments
